Curtains. Wednesday , June 13th , 2018 - 06:41:44 AM
The carriers normally contain a nylon axle two free-rolling nylon wheels a nylon swivel stern that is designed to be tangle-free and steel hooks that are chrome-plated. Nylon materials are used as curtain carriers since they would not easily break or rust and are highly durable. However the curtain carrier glide could also be made with a nylon swivel one-piece nylon spool and steel hook of chrome plating. Another type of curtain carrier is the breakaway carrier comprised of nylon wheels hook and body. The tracking for curtains would vary from one location to another to suit the type of construction of the room.
If you are using curtain wire go to the top of the window frame and attach one screw eye on the left and right hand side of the frame. Ready made organza curtains should have tabs at the top attach hooks to both ends of the curtain wire and then thread the wire through the tabs of both curtains and attach the wire to the screw eyes on the window frame. If you are using a wooden dowel use cup hooks and not screw eyes for the dowel to rest on. Thread the dowel through the tabs and place on cup hooks. Once the curtain has been hung it is ready to be embellished. Start with the left or right curtain first and open it up so that it is spread out wide across the window this way so you can see exactly where you have made the marks and where you are going to place the roses. For this purpose I am going to attach six roses to each curtain using a sequence of three. Remove the plastic backing from the rose by giving it a good pull; your rose will now be in two parts (the backing and also the rose and stem).
Follow the same steps for the curtain on the right NB In interior design balance is very important it creates a sense of harmony therefore what you do to the left curtain do the same to the right so that they will appear unified. There are many variations on the embellishments that you could use. Feathers work really well and so do mirrors bearing in mind that feathers would have to be stitched onto the curtain and mirrors will have to be glued on. NB When gluing on the mirrors first glue a piece of fabric onto the back of the mirror then glue the mirror onto the curtain; this will create traction between the mirror and the curtain enabling the mirror to stick easily. Also use glue that will become transparent once it has dried impasto gel is extremely effective when used as glue for this type of application.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Joelmoncorvo claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.